Sanitary Sewer Smoke Testing

The purpose of a smoke test is to locate breaks, defects, and plumbing faults in the sewer system.

During the smoke test you may see smoke coming from building vent stacks, holes in the ground, or other locations. Do not be alarmed and do not call the Police or Fire Department unless you are sure there is a true emergency.

The smoke is:

NON-Toxic

White / Gray in color

Leaves no residue

Does not pose a fire hazard

Smoke should not enter your home during the smoke test unless you have defective plumbing or dry drain traps.

Important Information

Prior to testing date, pour 1/2 gallon of water in every basement floor drain and any seldom used sink/shower drains. Also flush any seldom used toilets.

If smoke enters your home this indicates that DANGEROUS SEWER GAS could be regularly entering your home.

If this happens:

Note the source of the smoke

Open several windows for ventilation

Remove people and pets from building until smoke has cleared

Immediately notify test crew or call number below if you cannot locate a test crew

IMPORTANT

If there are any of the following in your building please contact us before the smoke test:

Individuals with respiratory problems

Individuals who are immobile

Pets who are confined and unattended